General Safety Instructions
Read this manual thoroughly before first use and keep it in a safe place for future
reference. The safety precautions enclosed herein reduce the risk of fire, electric shock
and injury when correctly adhered to. Follow all instructions and take notice of all
warnings to reduce the risk of fire or electric shock.
Important Warnings and Cautions!
To prevent contact with high voltage components inside, do not attempt to open the
cover or the back of the speaker. There are no user-serviceable parts inside this
product.
Do not repair the unit yourself. Only have it serviced by qualified personnel.
Do not expose this product to water, rain or moisture.
Do not immerse it in water. Do not use it near water or where water splashes or drips.
Do not touch the power plug with wet hands.
Electrical Safety and Cord Handling
Voltage: Before plugging in the power cord, make sure your outlet voltage and circuit
frequency correspond to the voltage stated on the product rating label and the outlet
socket is properly earthed and readily accessible.
Electrical circuit: Do not overload wall outlets, extension cords, or power boards as
this can result in a risk of fire of electric shock.
Protect the power adaptor: Do not kink, bend, strain or damage the supply cord and
protect it from sharp edges and heat. Do not run the cord near heat-producing
appliances such as radiators, stoves or irons. The excessive heat could melt the
insulation and expose live wires.
Cord connection: Run the cord in such a way that there will be no risk of anyone
pulling it inadvertently, tripping over it or stepping on it. Make sure nothing is placed
upon or against the cord.
Disconnect: Unplug the power cord from the wall outlet and disconnect the speaker if
it is not going to be used for an extended period of time. When disconnecting, always
grip the adaptor, do not pull on the adaptor cord.
To Next Page
Loading...