Web Based Wi-Fi Setup
• Turn on your speaker system that is connected to the Cobblestone.
• Open the Wi-Fi discovery menu on your Smartphone or Tablet and look for the
Cobblestone Service Set Identifier (SSID), ex. “Linkplay_XXXX”
• Select to connect your device to the Cobblestone network
• Open a web browser on your Smartphone or Tablet and input ‘10.10.10.254’ into the
URL bar. This will lead you to the Cobblestone Wi-Fi setup page.
• Select your network from the list of available networks and input your home Wi-Fi
password.
• Your device will disconnect from the Cobblestone network and the Cobblestone
connected speaker will then connect to your home Wi-Fi network.
• Your device will say “Connected” to indicate that your Cobblestone connected
speaker has successfully connected to your home Wi-Fi network.
To Next Page
Loading...
