Getting Started
Turning On the Cobblestone
To turn this unit ON, plug in the power cord.
When the unit turns on, the indicator light will flash Orange.
In order to connect this device to your Wi-Fi, you need to know your network
credentials.
Minimum Requirements
This device is compatible with iPhone, iPod Touch and iPad devices running on iOS
6.0 or later and Android 2.3.3 or later.
Also, the Cobblestone is compatible only with a router running on a 2.4 GHz band
network, so before setting up your Cobblestone to a Wi-Fi network, be sure your
router is running on that.
Your Home Network
To access music services, Internet radio and any digital music stored on your smart
device or DLNA enabled Network-Attached Storage (NAS) device, your home network
must meet the following requirements:
Home Network Requirements
NOTE: If you want to stream music through built-in App features such as Spotify, you
will need to have a high speed internet connection. (Playback experience may differ
depends on your internet connection speed.)
• If you are going to use the MUZO Player App on Android or iOS devices, a Wi-Fi
Network will be required for operating the MUZO Cobblestone
• You need to have your Wi-Fi network SSID and password
• Your network configuration should not be in isolation mode
Connect your Cobblestone to your Home Network
• Turn on your speaker connected to the Cobblestone.
• Install the MUZO Player App to your Smartphone or Tablet by downloading it from
the Apple App Store or Google Play Store.
• Ensure that your Smartphone is connected to the same network that you are
connecting your Cobblestone to.
To Next Page
Loading...