9
Modification reserved • 19, rue de Rennes • BP 83221 • F - 35690 ACIGNÉ
5. LOADER UNHITCHING
Caution
This operation must be carried out by the driver who must leave the seat and
ensure all manoeuvres are forbidden while he is working on the loader.
The loader must always be coupled to an implement to unhitch it.
5.1 Choose a flat and stable area.
5.2 Put the implement dumped on the ground slightly (20°
approx.).
5.3 Fit the parking stand(s).
5.4 Remove the frame locking pins and insert them into the
dedicated holes.
C1 and C2 loaders
C+ and Cu loaders
To Next Page
Loading...