17
Modification reserved • 19, rue de Rennes • BP 83221 • F - 35690 ACIGNÉ
11. 3
rd
FUNCTION
he front couplers mounted on the loader cross beam are used to
feed an implementc/w grab or any other attachement which
requires a DA extra function (option).
The connection will be easier after the engine is turned off and the
3rd function residual pressure is released.
Crowd and press the green switch at the same time to operate the
3rd service.
12. MACH 2
The Mach 2 (option) enables to instantly plug any implement
hydraulic function without any effort.
The Mach 2 kit includes 600 mm hoses to feed the MX implements.
Back-up control to be pressed if the solenoid
valve locks.
To Next Page
Loading...