Need help?Do you have a question about the MyCharge 6000 and is the answer not in the manual?
Left 2 LEDs flash for devices connected to Micro or Mini USB when power needs exceed capacity.
Middle 2 LEDs flash for devices connected to the USB port when power needs exceed capacity.
Right 2 LEDs flash for devices connected to the Apple connector when power needs exceed capacity.
LED 1 is lit indicating 0-17% Power.
LED 2 is lit indicating 17-34% Power.
LED 3 is lit indicating 34-50% Power.
LED 4 is lit indicating 50-67% Power.
LED 5 is lit indicating 67-84% Power.
LED 6 is lit indicating 84-100% Power.
Confirm device connection and Power Bank charge. Connect to power source if no status is shown.
Indicates overload protection. Unplug last device, reset Power Bank if overload persists.
Left 2 LEDs flash for devices connected to Micro or Mini USB when power needs exceed capacity.
Middle 2 LEDs flash for devices connected to the USB port when power needs exceed capacity.
Right 2 LEDs flash for devices connected to the Apple connector when power needs exceed capacity.
LED 1 is lit indicating 0-17% Power.
LED 2 is lit indicating 17-34% Power.
LED 3 is lit indicating 34-50% Power.
LED 4 is lit indicating 50-67% Power.
LED 5 is lit indicating 67-84% Power.
LED 6 is lit indicating 84-100% Power.
Confirm device connection and Power Bank charge. Connect to power source if no status is shown.
Indicates overload protection. Unplug last device, reset Power Bank if overload persists.
General| Brand | MyCharge |
|---|---|
| Model | 6000 |
| Category | Accessories |
| Language | English |
To Next Page
