6
Powering On and Off
To keep your Power Bank fully powered and ready to charge, keep the
function switch (Fig. 1) in the off/sync position when not in use. This deactivates all
connectors as well as the level check button so there is no unintentional drain on the battery. To
turn your Power Bank on, move the function switch left into the on/charge position (green indicator).
All connectors can now charge devices, and the level check button will report the current status.
Note: It is normal for Power Bank to be warm to the touch while in use.
Charging Devices
A Micro-USB, Mini-USB and Apple
®
connector are built-in to let you charge hundreds
of devices without the need for any additional adapters, as well as a full
size USB port for charging almost anything else.
To Next Page
Loading...
