Myson Touch 2 WiFi - Factory Reset Procedure

Touch 2 WiFi
32
Factory Reset
To reset the device to factory default settings, follow these steps:
• Use the Left / Right keys to scroll to SETUP ...........................................................
• Press and hold the Tick key for 10 seconds ...........................................................
• All of the icons on the display will appear for 2 seconds, then the display
will show option 1 or 2.
•
Mode 1 = Thermostat
Mode 2 = Time Clock
•
The thermostat will revert to the main display screen for the selected mode.
Note: Factory reset will cancel all parameters that were entered during the set-up and
pairing operations. These processes must be repeated after factory reset is completed.