NAD 414 - Technical Specifications; FM Section Performance; AM Section Performance; Physical Dimensions and Weight

SPECIFICATION - NAD 414 RDS STEREO AM/FM TUNER
FM Section
Tuning Range 87.50 - 108.00 MHz (25kHz/50k Hz steps)
Usable Sensitivity Mono: 11.2 dBf, 1.0 uV, 75 ohms, IHF
0.9 uV, 75 ohms, DIN
Stereo: 17.2 dBf, 2.0uV, 75 ohms, IHF
20uV, 75 ohms, DIN
50dB Quieting Sensitivity Mono: 16.1 dBf, 2.0uV, 75 ohms
Stereo: 36.1 dBf, 17uV, 75 ohms
Capture ratio 1.5dB
Image Rejection Ratio 80dB
IF Rejection Ratio 90dB
Signal-to-Noise Ratio Mono: 76dB, IHF
Stereo: 66dB, IHF
Alternate Channel Attenuation 60dB, IHF
Selectivity 60dB, DIN (Narrow)
(± 300kHz, 40kHz dev)
AM Suppression Ratio 50dB
Total Harmonic Distortion Mono: 0.1% (Wide)
Stereo: 0.2% (Wide)
Frequency Response 30Hz-15kHz (±1.5dB)
Stereo Separation 40dB @ 1kHz (Wide)
30dB at 70Hz -10kHz
Output Voltage 0.75V
Muting Level 17.2dBf, 2.0uV, 75 ohms
AM section
Tuning Range 522Hz-1611kHz (9kHz steps)
Usable Sensitivity 25uV
Image Rejection Ratio 40dB
IF Rejection Ratio 40dB
Signal-to-Noise Ratio 40dB
Total Harmonic Distortion 0.7% (Wide)
Output Voltage 0.15V
Physical Specification
Dimensions in mm 435 x 96 x 319
(Width x Height x Depth)
Net Weight 3.5kg
Shipping Weight 4.5kg