Need help?Do you have a question about the NAD 4130 and is the answer not in the manual?
General| Type | Stereo Tuner |
|---|---|
| Tuning Bands | FM, MW |
| FM Tuning Range | 87.5 - 108 MHz |
| Distortion (Mono) | 0.15% |
| Distortion (Stereo) | 0.3% |
| Weight | 4.2 kg |
| FM Sensitivity (Mono) | 1.0 µV |
| FM Sensitivity (Stereo) | 20 µV |
| Total Harmonic Distortion (FM) | 0.15% |
| Frequency Response | 30 Hz - 15 kHz |
| Stereo Separation | 40 dB |
| AM Sensitivity | 30 µV |
Lists all required instruments for performing alignment procedures.
Provides crucial general notes and warnings before commencing alignment.
Details the procedure for adjusting the tuning voltage of the oscillator circuit.
Outlines the steps for RF alignment and tracking using test equipment.
Describes the method for adjusting the Intermediate Frequency (IF) stages of the tuner.
Procedure for adjusting the oscillator circuit for accurate tuning.
Steps for fine-tuning the Intermediate Frequency (IF) stages.
Method for ensuring consistent performance across the tuning range.
To Next Page
