NAD 5240 - Front Panel and Mechanism Removal

FRONT
PANEL
REMOVAL
(with
Display
P.C.
Board)
1.
Remove
top
cover
and
tray
panel.
2,
Remove
four
screws
(F)
and
@
from
both
side
and
three
screws
(H)
from
bottom
side,
and
the
front
panel
will
be
removed.
)
MECHANISM ASSEMBLY REMOVAL
1. Remove tray panel,
2. Remove five screws and GQ), and two connectors
, and then the mechanism assembly will be re-
moved,
* Clamper lever removal
1.
Push
clamper
lever
hook
to
arrow
©
direction
with
minus
driver,
and
the
clamper
lever
will
be
removed by pulling it.
2.
\f
hook
is
broken,
use
screw
with
washer
™)
(63
x
8mm) as illustrated.
)
sf