NAD C426 - SPECIFICATIONS; FM Section Specifications; AM Section Specifications; General Unit Specifications

FM SECTION
Usable Sensitivity (98 MHz) 15 dBμ
Signal/Noise Ratio 72 dB (60 dBμ IHF-WTD Mono)
66 dB (60 dBμ IHF-WTD Stereo)
Frequency Response ±1.0 dB (20 Hz - 15 kHz, 60 dBμ)
Channel Separation (60 dBμ) - 30 Hz 33 dB
1 kHz 42 dB
10 kHz 32 dB
Capture Ratio (40 dBμ) 3 dB
AM Suppression 65 dB (60 dBμ, 100% Mod. FM, 30% Mod. AM)
Image Rejection (119.4 MHz) 85 dB
I.F. Rejection (10.7 MHz) 78 dB
Pilot Suppression (60 dBμ) 60 dB
Total Harmonic Distortion* - Mono 0.25%
Stereo 0.35%
Auto Search Sensitivity - On 24 dBμ
O 15 dBμ
RDS Decode Sensitivity 26 dBμ
AM SECTION
Usable Sensitivity (999/1000 kHz) 30 dBμ
Signal/Noise Ratio (5 mV in) 38 dB
Total Harmonic Distortion (5 mV in) 3%
IF Rejection (450 kHz) 36 dB
Image Rejection (F+2xIF) 28 dB
Selectivity 17 dB
Loop Sensitivity (20dB S/N) - 999 /1000 kHz 66 dB
603/600 kHz 66 dB
1404/1400 kHz 66 dB
Frequency response (100 - 2.3 kHz, 5 mV) ±6 dB
GENERAL SPECIFICATIONS
Standby power <0.5W
Unit Dimension (W x H x D) 435 x 87 x 312 mm (Gross)**
Net weight 4.2 kg
Shipping weight 5.3 kg
* 60 dBμ, L=R 75 kHz for 120V version; 40 kHz Dev for 230V version
** Gross dimensions include feet, [PRESET/TUNE] control knob and rear panel terminals.
Specications are subject to change without notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest
information about C 426.
REFERENCE
SPECIFICATIONS
13
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ