NADAMOO E3000 - Page 14

6
1.8 Supported code system
Support code system as follows, you can open the relevant code through the menu or serial
command
bar code type
Default
open
minimum
length
bar code ID
CODE 39
√
3
A
CODE 128
√
3
C
UPC/EAN
√
13
E
CODEBAR
x
4
F
CODE 93
x
3
G
CODE 11
x
3
H
INTERLEAVED 2 OF 5
（交叉 25）
√
4
I
MSI
x
3
M
DISCRETE 2 OF 5
（工业 25）
x
4
S
HAN XIN
x
3
X
GS1 DATABAR
x
3
e
PDF417
√
3
L
DATA MATRIX(DM)
√
3
d
QR
√
3
Q
MicroQRCode
√
3
Q
AZTEC CODE
x
3
z
MAXI CODE
x
3
U
1.9 Start-up, shutdown, standby and restart
Start-up：Connect host computer with scanner, which will automatically start-up and in working state.
Shutdown：Remove the data cable which is connected with scanner; remove the USB which is connected
with host computer; remove the power adapter which is inserted into RS-232 serial port.
Standby：Scanner with automatic sleep standby function, if 30 minutes without work it will be in standby
mode, but it will automatically start-up when barcode approach.
Restart：If the scanner crashes or doesn't respond, please switch it off and restart.