About This User Guide
Pls read all the content of the user guide carefully to use the products safely and effectively.
You are advised of keeping it properly for your using reference.
Disclaimer
Please do not dismantle the product or tear up the seal on it, otherwise we won’t provide
warranty or replacement service.
The pictures in this user guide are for reference only. If there are any pictures which not
match the actual product, please take actual products as the standard. Updated information
is subject to change without notice.
All information contained in this guide are protected by copyright, and our company
reserves all rights. All or part of this guide is prohibited to excerpt, copy, bundle other
products, or sell without the written permission from us.
Version Record
Add part of unrecognized setting code
1. Add lights and position light control
2. Add communication mode: USB, KBW and USB
serial port
3. Trigger mode add auto-induction mode
Add default configuration parameter selection (including
default configuration 1 and default configuration 2)
Add the difference between 1D and 2D software
Optimize the function of auto-induction mode
1D supports auto- induction mode
Add 5 default configurations
Add automatic line breaking
Implement the default configuration 3
To Next Page
Loading...
