25
Flash Handset
16.5 tuner preset programming
In TUN (tuner) mode the prog key enables specific FM
station frequencies to be assigned to preset memory. To
assign a station to a preset, first tune manually by keying
the station frequency directly from the numeric keypad or
by using the up or down keys (or scan). Press and hold the
prog key on the handset. The tuner is now in preset
programming mode. The tuner preset indicator will flash
and the display will show
——. Press the desired preset
number from the numeric keypad. The display will show
—— or P if the preset number is already in use. Exit from
program mode and save the new or overwritten presets by
pressing and holding the prog key. To exit tuner program
mode without saving (or overwriting) presets, select 0 0 on
the numeric keypad. To erase a preset number, select the
preset and press and hold the disp key. To clear all presets
press and hold the prog key followed by the disp key.
17.1 Introduction
Narcom 3 is a multi-functional remote control handset
designed to be used with Naim Audio CD players,
integrated amplifiers, preamplifiers and preset tuners.
The handset control configuration is based around three
types of keys: System Component Keys, Global Keys and
Soft Keys.
17.2 system component keys
These keys switch the operation of the Soft Keys into modes
appropriate to each system component (CD, tuner, preamp,
record).
cd: Switches the action
of the Soft Keys to that
appropriate for a CD
player.
tuner: Switches the
action of the Soft Keys
to that appropriate for
a preset tuner.
preamp: Switches the
action of the Soft Keys
to that appropriate for
an integrated or
preamplifier.
record: Switches the
action of the Soft Keys
to select record inputs
on appropriately
equipped preamps.
17.3 Global Keys
These keys operate
specific component
functions regardless of
the System Component
Key setting.
Preamplifier
vol (& ) Modifies the preamplifier output volume
and the volume control position.
mute Reduces the preamplifier output volume to
zero. A second press restores the volume.
bal (&) Modifies the output channel balance. Some
Naim amplifiers have control of balance
available only from the remote handset. On
these products the balance will automatically
Narcom 3 Handset
System
component
keys
Global keys
(Preamplifier)
Global keys
(CD Player)
Global keys
(Tuner)
Soft keys
To Next Page
Loading...
