Need help?Do you have a question about the NAIM NAIT 5si and is the answer not in the manual?
General| Power Output | 60W per channel into 8 ohms |
|---|---|
| Headphone Output | 6.35mm jack |
| Weight | 6.8 kg |
| Input Sensitivity | 150mV |
| Inputs | 4 x RCA |
| Dimensions | 70 x 432 x 301 mm |
| Frequency Response | 10Hz |
| Mains Supply | 115V or 230V, 50/60Hz |
| Outputs | Speaker output |
Details on using and maintaining Naim interconnect and loudspeaker cables for optimal audio connection.
Covers plug wiring, fuses, non-rewirable plugs, and mains circuit advice for safe operation and performance.
Covers equipment placement, switching procedures, running-in, and radio interference considerations.
Critical safety advice on protecting Naim hi-fi systems from lightning damage by disconnecting them.
Guidance on resolving issues, seeking service, and obtaining updates from authorized sources.
Overview of the Supernait 2's features, installation, and initial connection procedures.
Details on signal inputs, speaker outputs, AV/HDD outputs, and headphone connection.
Explains AV Bypass mode and other signal inputs/outputs like sub out and pre-amp out.
Information on upgrading the Supernait 2 with external Naim power supplies.
Important notes on signal ground connections, earth, and avoiding hum loops.
Details on the 3.5mm Remote In socket and mini-USB interface for control and updates.
Overview of the Supernait 2's front panel and rear panel controls and connection points.
Identifies and explains the function of the volume, balance, and source selection controls on the front panel.
Detailed diagram and explanation of all rear panel connection sockets and their labels.
Illustrates example system configurations for the Supernait 2 with external power supplies and amplifiers.
Diagram showing connection of the Supernait 2 to a Hi-Cap power supply for an upgrade.
Diagram illustrating system connection of the Supernait 2 with a NAP 200 power amplifier.
Diagram showing system connection of Supernait 2 with both Hi-Cap power supply and NAP 200 amplifier.
Explains advanced operational features like input switching, mute, display, and fault conditions.
Lists the technical specifications for the Supernait 2 amplifier, including power output and dimensions.
Overview of the Nait XS 2's features, installation, and initial connection procedures.
Details on signal inputs, speaker outputs, AV/HDD outputs, and headphone connection.
Explains AV Bypass mode and other signal inputs/outputs like sub out and pre-amp out.
Information on upgrading the Nait XS 2 with external Naim power supplies.
Important notes on signal ground connections, earth, and avoiding hum loops.
Details on the 3.5mm Remote In socket and mini-USB interface for control and updates.
Overview of the Nait XS 2's front panel and rear panel controls and connection points.
Identifies and explains the function of the volume, mute, and source selection controls on the front panel.
Detailed diagram and explanation of all rear panel connection sockets and their labels.
Illustrates example system configurations for the Nait XS 2 with external power supplies and amplifiers.
Diagram showing connection of the Nait XS 2 to a FlatCap XS power supply.
Diagram showing system connection of Nait XS 2 with both Hi-Cap power supply and NAP 200 amplifier.
Explains advanced operational features like input switching, mute, display, and fault conditions.
Lists the technical specifications for the Nait XS 2 amplifier, including power output and dimensions.
Overview of the Nait 5si's features, installation, and initial connection procedures.
Explanation of the HDD output which routes the selected input signal to an external component.
Details on using the 6.3mm headphone socket and its effect on speaker output.
Overview of the Nait 5si's front panel and rear panel controls and connection points.
Identifies and explains the function of the volume and source selection controls on the front panel.
Detailed diagram and explanation of all rear panel connection sockets and their labels.
Explains advanced operational features like input switching, mute, display, and fault conditions.
Details on how to enable and use the automatic input switching feature for convenience.
Explains how to integrate the Nait 5si with a home theatre system using the AV Bypass mode.
Explains how fault conditions are indicated by flashing front panel buttons and their meanings.
Lists the technical specifications for the Nait 5si amplifier, including power output and dimensions.
Introduction to the multi-functional remote control handset supplied with Naim amplifiers.
Explains the operation of the Narcom 4 handset, including key types and modes.
Identifies and describes the functions of various keys on the Narcom 4 remote handset.
States Naim Audio products' conformance with relevant EU directives and standards.
Critical safety warnings and precautions for operating Naim equipment, including earthing and battery safety.
To Next Page
