Need help?Do you have a question about the NAIM nap 250 and is the answer not in the manual?
General| Type | Stereo Power Amplifier |
|---|---|
| Power Output | 80W per channel into 8 ohms |
| Gain | 29 dB |
| Dimensions | 87 x 432 x 314 mm (H x W x D) |
| Input Sensitivity | 0.775V |
| Distortion | < 0.1% |
Guidance for initial setup and dealer responsibilities for optimal system performance.
Details on Naim's specific interconnect and loudspeaker cables for safety and performance.
Procedure for safely switching power amplifiers on and off, including wait times.
Information on the time required for Naim equipment to reach optimal performance.
Guidance on mains supply, including fuse ratings and potential noise reduction methods.
Advice on placing Naim equipment for optimal performance and separation from other devices.
Steps to take if you encounter problems with your Naim system.
Important advice for safe operation and to protect equipment from damage.
Correct wiring procedure for mains leads to ensure safety and proper connection.
Disposal instructions for cut-off non-rewireable mains plugs to prevent shock hazards.
Guidance on replacing damaged fuse carriers and using approved plug fuses.
Details on grounding, signal negative connections, and bridged amplifier considerations.
Explanation of thermal protection mechanisms and fan operation in the NAP 500.
Requirements for using Naim Audio speaker cable and connectors with the NAP 500.
Visual guide illustrating the connection of the NAP 500 to its power supply and speakers.
Detailed technical specifications for the NAP 500 and NA PS500 power supply.
Details on grounding, signal negative connections for the NAP 300.
Explanation of thermal protection mechanisms and fan operation in the NAP 300.
Requirements for using Naim Audio speaker cable and connectors with the NAP 300.
Visual guide illustrating the connection of the NAP 300 to its power supply and speakers.
Detailed technical specifications for the NAP 300 and NA PS300 power supply.
Details on grounding and signal negative connections for the NAP 250.
Explanation of thermal protection and mains supply interruption in the NAP 250.
Requirements for using Naim Audio speaker cable and connectors with the NAP 250.
Diagram showing the rear panel layout and connection points for the NAP 250.
Detailed technical specifications for the NAP 250 amplifier.
Details on grounding and signal negative connections for the NAP V145.
Explanation of thermal protection and mains supply interruption in the NAP V145.
Requirements for using Naim Audio speaker cable and connectors with the NAP V145.
Diagram showing the rear panel layout and connection points for the NAP V145.
Detailed technical specifications for the NAP V145 amplifier.
Details on grounding and signal negative connections for NAP 200 and NAP 150.
Explanation of thermal protection and mains supply interruption for NAP 200/150.
Requirements for using Naim Audio speaker cable and connectors with NAP 200/150.
Diagram showing the rear panel layout and connection points for the NAP 200.
Detailed technical specifications for the NAP 200 amplifier.
Diagram showing the rear panel layout and connection points for the NAP 150.
Detailed technical specifications for the NAP 150 amplifier.
Details on grounding and signal negative connections for the NAP V175.
Explanation of continuous operation and thermal protection features in the NAP V175.
Requirements for using Naim Audio speaker cable and connectors with the NAP V175.
Diagram showing the rear panel layout and connection points for the NAP V175.
Detailed technical specifications for the NAP V175 amplifier.
Details on Electromagnetic Compatibility (EMC) testing and compliance standards met by the products.
To Next Page
