Need help?Do you have a question about the NAIM NAP 150 - ISSUE 1 and is the answer not in the manual?
General| Power Output | 50W per channel into 8 ohms |
|---|---|
| Total Harmonic Distortion | <0.1% |
| Frequency Response | 20Hz - 20kHz |
| Dimensions | 432 x 88 x 310 mm |
| Inputs | 1 x RCA |
| Input Impedance | 10k ohms |
| Gain | 29dB |
| Distortion | < 0.01% |
Guide to installing Naim equipment, emphasizing dealer responsibility for optimal sound.
Instructions on using Naim cables, including correct orientation, length, and signal source connection.
Initial setup steps, including power sequencing, running-in period, and mains supply considerations.
Crucial safety advice for Naim equipment, covering mains, lightning, and radio frequency interference.
Guidance on correctly connecting mains leads, plugs, and fuses for safety and performance.
Detailed notes on connecting the NAP 500, including mains earth, signal negative, and bridged amplifier considerations.
Information on the NAP 500's thermal protection, fan operation, and potential for output interruption.
Specifics on using Naim loudspeaker cables and connectors with the NAP 500 to ensure safety and performance.
Details on NAP 300 connections, including mains earth, signal negative, and system grounding.
Information on NAP 300 thermal protection and fan operation during high-level use.
Guidelines for using Naim speaker cables and connectors with the NAP 300 to comply with safety regulations.
Notes on connecting the NAP 250, emphasizing mains earth and signal negative for system grounding.
Details on NAP 250 thermal protection and mains supply interruption when the unit overheats.
Requirements for using Naim speaker cables and connectors with the NAP 250 to avoid amplifier damage.
Notes on NAP V145 connections, including mains earth, signal negative, and avoiding hum loops.
Information on NAP V145 thermal protection and mains supply interruption during prolonged high-power use.
Guidelines for using Naim speaker cables and connectors with the NAP V145 to ensure safety and performance.
Notes on NAP 200/150 connections, emphasizing mains earth and signal negative for proper system grounding.
Details on NAP 200/150 thermal protection and mains supply interruption when the unit reaches high temperatures.
Requirements for using Naim speaker cables and connectors with NAP 200/150 to avoid amplifier damage.
Notes on NAP V175 connections, including mains earth, signal negative, and avoiding hum loops.
Information on NAP V175 operation, thermal protection, and mains supply interruption during high dissipation.
Guidelines for using Naim speaker cables and connectors with the NAP V175 to ensure safety and performance.
Identifies Naim Audio Limited, its address, and contact details.
Lists the specific Naim products covered by the declaration of conformity.
Lists the safety standards (e.g., HD 195-56, EN 60 065) that the products comply with.
Details the EMC emissions and immunity testing standards applied, such as CISPR and IEC.
To Next Page
