Need help?Do you have a question about the NAIM NAC 552 and is the answer not in the manual?
General| Output level | 75 mV |
|---|---|
| Amplifier class | - |
| Output impedance | 50 Ω |
| Audio output channels | - channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | - % |
| Speakers connectivity type | RCA |
| Product color | Black |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 314 mm |
|---|---|
| Width | 432 mm |
| Height | 87 mm |
| Weight | 12900 g |
Step-by-step instructions for correctly wiring mains plugs to Naim equipment.
Guidance on replacing equipment fuses with correct specifications.
Safety warning regarding safe disposal of non-rewirable mains plugs.
Recommendations for equipment placement to reduce hum and ensure stability.
Correct procedure for powering on Naim preamplifiers and associated equipment.
Essential safety measures to protect equipment from lightning strikes.
Diagram and explanation of the NAC 552 rear panel connectors.
Illustrates the physical connections between NAC 552 and its power supply.
Diagram and explanation of the NAC 252 rear panel connectors.
Illustrates the physical connections between NAC 252 and its SuperCap.
Information on upgrading power supplies for these preamplifiers.
Illustrates NAC 282 connections to Hi-Cap and NAPSC power supplies.
Illustrates NAC 282 connections to SuperCap and NAPSC power supplies.
Illustrates NAC 202 connections to Hi-Cap and NAPSC power supplies.
Illustrates NAC 152 XS connections to a FlatCap power supply.
Illustrates NAC 152 XS connections to FlatCap and Hi-Cap supplies.
Lists fault indications for various preamplifier models.
To Next Page
