NANLITE FS-150 - INT LOOP Mode

7
②INT LOOP
INT LOOP setting: Press "left knob" to select DIM 1, DIM 2, then rotate "left knob" to select corresponding value
according to demands; Press "right knob" to select SPEED, then rotate "right knob" to select corresponding value
according to demands, SPD range is from 2s-30s.
Press "left knob" to select DIM 1, DIM 2.
Rotate "left knob" to select corresponding value.
SPD: 8s
FX: INT LOOP
0% - 100%
Press "right knob" to select SPD.
Rotate "right knob" to select corresponding value.
SPD: 8s
FX: INT LOOP
0% - 100%
SPD: 8s
FX: INT LOOP
0% - 100%
SPD: 8s
FX: INT LOOP
0% - 99%
SPD: 8s
FX: INT LOOP
0% - 99%
SPD: 8s
FX: INT LOOP
0% - 99%
SPD: 8s
FX: INT LOOP
0% - 99%
SPD: 9s
FX: INT LOOP
0% - 99%