NANLITE FS-150B - Page 9

8
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
Rotate the "left knob" to select the desired effect.
①CCT LOOP
CCT LOOP setting: rotate the "right knob" to select from DIM, CCT and SPD (Range: 02S…30S),
then rotate the "left knob" to adjust the value of DIM, CCT and SPD.
Rotate the "right knob" to select from DIM, CCT and SPD.
CCT LOOP
.
.
.
WELDING
Rotate the "left knob" to adjust the value of DIM, CCT and SPD.
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
EFFECT CH: 512
DIM: 100%
FX: CCT LOOP
EFFECT CH: 512
DIM: 099%
FX: CCT LOOP