Technical specifications
3232
* At engine fl ywheel, as per ISO 8665-1
Certain specifi cations may vary depending on your order.
The recommended cruising speed is 200 rpm under the maximum rpm speed at full throttle
ENGINE SPECIFICATIONS V6.270 V6.320 V6.350
Cycle 4 strokes Diesel
Max. power - kW (hp)* 198 / 270 235 / 320 257 / 350
Number of cylinders / Arrangement 6 in line
Displacement (cm3) 4164
Distribution 2 valves per cylinder
Compression rate 17.5 : 1
Aspiration Turbo compressor and intercooler
Bore x stroke (mm) 94 x 100
Maximum rpm speed at full throttle (rpm)* 3800 ± 50 rpm
Idle rpm speed (rpm)* 700 ± 50 rpm
No load rpm speed (rpm)* 3900 ± 50 rpm
Weight without gearbox (kg) 460
INJECTION SYSTEM V6.270 V6.320 V6.350
Injection Direct Common Rail
Injection order 1-5-3-6-2-4
Injection pump BOSCH Common Rail
Injection pressure (bar) 1600
LUBRICATION V6.270 V6.320 V6.350
Type Forced by pump
Pressure at idle rpm speed (bar) 1 - 4
Capacity (engine on an horizontal axis) 9 mini - 12.3 maxi
COOLANT V6.270 V6.320 V6.350
Pressure setting of the plug (bar) 1
Coolant capacity (50% water - 50% antifreeze) 18
ELECTRICAL V6.270 V6.320 V6.350
Starter (kW) 2.3
Battery capacity (Ah) 100-150
Alternator (V / A) 12 / 110
To Next Page
Loading...
