16
FUNCTION MENU
4. Display System Troubles? Displays a 1- or 2-digit error code representing a problem
detected in the system. (See SYSTEM TROUBLE ERROR CODES for a description of these
codes). Use NEXT(
P) and PRIOR (Q) to scroll system troubles. (For GEM-
P9600/3200 panels only).
5. Display Fire Alarms? Displays alarms that have occurred on the Fire Zone(s). Press the
NEXT and PRIOR Buttons to scroll zones (required for GEM-P3200/9600 panels. GEM-
P816/1632 panels will auto-scroll).
6. Display Fire Troubles? Displays trouble conditions that have been detected on the Fire
Zone(s). Use NEXT(
P) and PRIOR (Q) to scroll zones (required for GEM-
P3200/9600 panels. GEM-P816/1632 panels will auto-scroll).
7. Activate Chime? The Chime Mode will sound a tone at the keypad when the programmed
zone is opened while disarmed. To deactivate the Chime Mode, execute Function 7 once again.
Note: The Chime Mode is disabled while armed.
8. Activate Watch Mode? (Optional - Watch Mode programmed? YES NO)
This optional feature simultaneously turns on all zones designated as Day Zones, which will
cause an indication at the keypad if a zone is opened while the system is disarmed. To
deactivate the Watch Mode, arm, then disarm. All Day Zones will revert to regular Burglary
Zones. Note: The Watch Mode is disabled while armed.
(Note: This function available with GEM-
P9600 and GEM-P3200 control panels only).
CHIME
04
CHIME
05
CHIME
06
CHIME
07
CHIME
08
To Next Page
Loading...
