37
SYSTEM TROUBLE ERROR CODES
Trouble
Indication
System Trouble
Condition
Action
E40-00
RF Self Test Failure A wireless motion sensor on the zone indicated has failed its automatic self test routine.
Call installing company for service.
E41-NN
Fire Trouble A problem has been detected on the Fire zone indicated. Call installing company for service.
(GEM-P1632, GEM-P816 and GEM-P1664 panels only).
E51-00
Bell/Siren Trouble There is a problem with the Bell or Siren. Call installing company for service.
E58-00
Telemetry Trouble Call installing company for service.
E59-00
Telemetry Failure Call installing company for service.
E66-00
Dirty Smoke Detector Clean Smoke Detector or call installing company for service.
E99-00
Keypad Panic Shorted
too Long
Call installing company for service.
To Next Page
Loading...
Need help?
General
