Need help?Do you have a question about the NAPCO Security System and is the answer not in the manual?
Explains the numeric display behavior for alarms, troubles, and system status.
Details the function and indicators of ARMED/ALARM, STATUS, BYPASS, and FIRE/TROUBLE lights.
Describes the different audible signals provided by the keypad sounder.
Covers Bell/Battery Test and Telco Test functions for system integrity checks.
Details how to view system status, bypassed zones, and alarm history.
Explains how to access programming, enable chime, and activate watch mode.
Covers instant protection, system reset, and panic alarm activation.
Guidance on creating and managing up to 15 unique user codes for system access.
Information on special codes for temporary access and system management.
Details on programming an access code for remote door unlocking.
Steps to arm the system before leaving the premises, including exit delay.
Addresses common system troubles that may prevent arming and their solutions.
Guidance on arming the system when zones are in a trouble condition.
How to arm the system to cancel entry delay for immediate protection.
Steps to disarm the system upon returning to the premises.
How to view and reset alarm history after the system has been disarmed.
Using a special code to silently alert a central station during a forced disarming.
How to bypass specific zones for perimeter protection while staying home.
Using Group Bypass to disable multiple interior zones simultaneously.
Instructions for activating Fire, Police, or Auxiliary panic alarms.
Overview of 24-hour fire protection using smoke detectors or heat sensors.
Understanding the FIRE/TROUBLE light and sounder for fire events or issues.
Procedure for clearing fire alarms and trouble conditions.
To Next Page
General
