NAPCO GEMINI C Series - PRIORITY AREA ARMING OPTIONS; CONFIGURING AREA ARMING PRIORITY

NAPCO Security Group
NAPCO Gemini C-Series Control Panel Programming Instructions--Volume 2
Page 106 Programming Instructions, Volume 2
PRIORITY AREA ARMING OPTIO NS (ADDRES S 5720 -5727)
PRIORITY AREA ARMING:
Prevents area arming if the alternate Priority Area has not yet been armed. Note: Area 1 cannot be programmed for Priority Area
Arming.
 1. Select the desired arming area.
 2. Enter the corresponding Area number in each the address location, in Binary (Bit) Format. NOTE: See Direct Address
Programming Example on page 72.
 3. Press U to save.
NOTE: Dark shaded data value box shows option not available.
ADDR
PRIORITY AREA ARMING
ARMING
AREA
A1 A2 A3 A4 A5 A6 A7 A8
1 2 3 4 5 6 7 8
1 5720
2 5721
3 5722
4 5723
5 5724
6 5725
7 5726
8 5727
[Default = blank (•) blank (•) from address 5720-5727]