Napoleon GDS60-N User Manual

1
W415-0158 / E / 02.19.04
INSTALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 4Y8 Canada • (705)721-1212 • fax(705)722-6031
www.napoleonfireplaces.com • ask@napoleon.on.ca
INSTALLATION AND OPERATION INSTRUCTIONS FOR:
VENTED GAS FIREPLACE HEATER
NATURAL GAS MODELS GDS60-N and GS60-N
PROPANE GAS MODELS GDS60-P and GS60-P
Model GS60 is made up of Model GDS60 and the Adapter Kit GS-150KT
CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS, CSA 2.33, ANSI Z21.88 FOR VENTED GAS FIREPLACE HEATERS
Installation and service must be performed by a qualified installer, service
agency or the gas supplier.
WARNING: If the information in these instructions is not followed exactly, a fire or
explosion may result causing property damage, personal injury or death.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapours and liquids in the vicin-
ity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Do not use any phone in your build
ing.
• Immediately call your gas supplier
from a neighbour's phone. Follow the
gas supplier's instructions.
• If you cannot reach your gas supplier,
call the fire department.

Napoleon GDS60-N Specifications

General

Brand	Napoleon
Model	GDS60-N
Category	Indoor Fireplace
Language	English

Summary

Installation and Operation Instructions

Safety Precautions

General safety warnings for installation and operation.

What to Do If You Smell Gas

Steps to take immediately if a gas leak is detected.

General Safety Warnings

President's Lifetime Limited Warranty

Location and Clearances

Minimum Clearances to Combustibles

Specifies required distances from the stove to combustible materials.

Direct Vent Specifics - Model GDS60

Venting Lengths & Air Terminal Locations

Details on vent lengths, air terminal locations, and installation rules.

Air Terminal Installations

Installation Clearances

Guidelines for positioning air terminals relative to building features.

Rear Vent Horizontal Termination

Venting Parameters

Vertical Installation

Horizontal Venting Installation

Vertical Venting Installation

B-Vent Specifics - Model GS60

Vent Installation and Gas Connection

Gas Installation Procedures

Steps for connecting the gas line and checking for leaks.

Log Placement

Operation and Maintenance Procedures

Spill Switch and Venting Checks

Basic Operating Instructions

Lighting and Maintenance Instructions

Maintenance Procedures

Troubleshooting Common Issues

Pilot Ignition and Flame Issues

Solutions for problems related to pilot ignition and flame stability.

Main Burner Ignition and Operation Problems

Problems with the main burner not igniting or staying lit.

Advanced Troubleshooting

Burner Extinguishing and Exhaust Issues

Flame Appearance and Vent Blockage