35
Operation
and use
The E-field and H-field values are output
separately with much higher accuracy than
the LED display.
The ESM-TS Interface Set is required to read
out the measured values from the ESM
“RadMan”. This comprises software, a fiber
optics cable and an opto-electric converter.
The software program allows a wide range of
remote control functions and also allows
measured values to be read out and saved.
ESM-30 only:
Data recorded using the ESM-30
“RadMan XT” can be easily evaluated in
various ways and printed out as a report.
Applications and use
Downloaded from Arrow.com.
To Next Page
Loading...
