15
ROUTINE WITH SRM
Switching between operating modes also includes some
clever features. For example, if you determine the center
frequency of a UMTS frequency channel using spectrum
analysis, the SRM will continue measuring at exactly
that frequency when you switch to ‘UMTS P-CPICH
Demodulation’, ‘Scope’, or ‘Level Recorder’ mode.
Meaningful measurement involves a process, which
begins with configuring the instrument and ends with
the evaluation, documentation, and management of
the measured data. The SRM-3006 TS PC software lets
you do all this easily.
You can also combine instrument setups into measure-
ment routines and upload them to the SRM using the PC
software. Conversely, you can download the results from
the SRM, evaluate, record, and discuss them without any
time-consuming further processing on a PC.
To Next Page
