Narvon 378SM261 - Installation and Safety Precautions; Setup Procedures; General Safety Guidelines

NARVON
3
INSTALLATION
UNPACKING
POSITIONING
ELECTRIC CONNECTION
MAIN SAFETY INFORMATION
1. Removethecartonboxandtheplascbag.
2. Make sure that the machine is intact and has not been damaged
during transport.
3. Disposeofanypackagingmaterialsproperly,keepanythatyou
may need for future moves.
1. Placethemachineonasturdyhorizontalsurface.
2. Forimprovedvenlaon,maintainadistanceof10in.
between the unit and walls or other obstacles. Increase the
distanceiftheobstaclesareaheangsource.(Fig.1)
3. Leave 60 in. of free space in front of the machine to allow for
easyuseandmaintenance.(Fig.1)
4. Leave 10 in. of free space above the machine to allow for
removaloflids.(Fig.1)
5. Whenthemachineisinplace,adjusttherubberlegstolevel.
1. SettheMainPowerSwitchtoOFF(0).
2. Verify that the machine is properly grounded.
3. Verify the voltage of the outlet matches what is
indicated on the serial plate.
4. Verifythecurrentavailableissucientforthe
maximumrequiredbythemachine.
5. Inspectthecordfordamage,ifanyispresent
DO NOT plug into the outlet.
6. DONOTuseanextensioncordoradapterto
connect the machine to the electric supply.
• DO NOT touch the machine with wet hands or feet.
• DO NOT operate when barefoot.
• DO NOT allow the machine to be operated by
children or untrained persons.
• DO NOT leave the machine outside.
• DO NOT pull the cable to disconnect the machine
from the electric supply.
• DONOTplacethemachinenearammableor
explosivematerials.
• DO NOT place the machine nearby any heat source
orheangelement.
Ifindoubt,consultaspecializedelectricaltechnician.
Beforeinserngtheplugintotheelectricoutlet,
carefully verify the following:
Whenliingortransporng,
DO NOT GRAB THE MACHINE BY
THE CYLINDRICAL EVAPORATORS.
The manufacturer is not
responsible for any damage caused
by improper handling.
CAUTION
10”
10”
10”
60”
Fig. 1