Narvon 378SM261 - Washing & Sanitizing; Condenser Cleaning

NARVON
6
WASHING & SANITIZING
CONDENSER CLEANING
WASHING
SM261
(Fig.14) SM262 & SM263 (Fig.15)
SANITIZING
Tomaintainhealthstandardsandproductquality,themachineshouldbecleanedasoenaspossible.
Regularmaintenanceofthecondenserensuresthequalityoftheproductandeciencyofthemachine.
This cleaning should be performed at least once a month.
Sanizingmustbedonebeforetheinialuseofthe
machineorifitisnotusedforanextendedperiodofme.
• Fillabasinwithlukewarmwater(Approx.104°F)and
aneutraldetergentsuitableforplascitems.
• DONOTuseabrasivepowderswhichmightaect
the bowl’s transparancy.
• Washallcomponents(exceptthelid)inthebasin.
• DO NOT wash the lid by dipping in water. Doing so
may damage electric components.
• Useawet,socloth.
• Rinse all parts carefully with clean lukewarm water to
remove any residual soap.
• Dryallpartswithasocloth.
• Ifthemachinewillnotbeinuseforanextended
period,coverandkeepitawayfromdust.
• Remove the back panel by unscrewing the 4 screws.
• Useasoanddrybrushtoremovethedustfromthe
condenserns.
• Whencleaningiscomplete,replacethebackpanel
with the 4 screws.
• Removethelesidestainlesssteelpanelby
unscrewingtheFixingKnob(A)asshown.
• Useasoanddrybrushtoremovethedustfromthe
condenserns.
• Whencleaningiscomplete,replacethesidepanel
withtheFixingKnob(A).
• Followwashinginstrucons.
• Makeasoluonoflukewarmwater(Approx.104°F)
andhypochlorite(bleach)witha10gto1Lrao.
• Useasoclothorbrushtoapplythesoluon
to all components.
• Rinse all parts carefully with clean lukewarm water
toremoveanyresidualsoluon.
• Dryallpartswithasocloth.
DO NOT wash any components of the machine in the dishwasher.
The machine must be turned OFF and unplugged from the power source before cleaning.
CAUTION
CAUTION
Fig. 14 Fig. 15
A