National Instruments 622 Series

© National Instruments | I-1
Index
Symbols
+5 V power source, 3-5
Numerics
10 MHz reference clock, 9-2
100 kHz Timebase, 9-2
20 MHz Timebase, 9-2
37-pin devices
accessory options, 2-8
cabling options, 2-8
68-pin devices
accessory options, 2-3
cabling options, 2-3
80 MHz source mode, 7-36
80 MHz Timebase, 9-2
A
A/D converter, 4-2
accessories, 2-3
37-pin connector devices, 2-8
68-pin connector devices, 2-3
choosing for your device, 1-13
PCI/PCIe/PXI/PXIe-6251, A-30
PCI/PCIe/PXI/PXIe-6259, A-46
PCI/PXI-6220, A-3
PCI/PXI-6221 (68-pin), A-6
PCI/PXI-6225, A-16
PCI/PXI-6229, A-22
PCI/PXI-6250, A-28
PCI/PXI-6254, A-38
PCI/PXI-6255, A-40
PCI/PXI-6280, A-54
PCI/PXI-6281, A-56
PCI/PXI-6284, A-62
PCI/PXI-6289, A-64
PCI/XPI-6224, A-14
PCI-6221 (37-pin), A-12
USB-6221 BNC, A-10
USB-6221 Screw Terminal, A-8
USB-6225 Mass Termination, A-20
USB-6225 Screw Terminal, A-18
USB-6229 BNC, A-26
USB-6229 Screw Terminal, A-24
USB-6251 BNC, A-34
USB-6251 Mass Termination, A-36
USB-6255 Mass Termination, A-20,
A-44
USB-6259 BNC, A-50
USB-6259 Mass Termination, A-52
USB-6281 Mass Termination, A-60
USB-6289 Mass Termination, A-68
used with M Series, D-4
accuracy, analog triggers, 11-6
acquisitions
circular-buffered, 4-9
digital waveform, 6-3
double-buffered, 4-9
hardware-timed, 4-9
on-demand, 4-9
software-timed, 4-9
AI channels, sampling with AI Sample Clock
and AI Convert Clock, C-2
AI Convert Clock signal, 4-25
AI Convert Clock Timebase signal, 4-29
AI data acquisition methods, 4-9
AI FIFO, 4-2
AI Hold Complete Event signal, 4-29
AI Pause Trigger signal, 4-31
AI Reference Trigger signal, 4-30
AI Sample Clock signal, 4-23
AI Sample Clock Timebase signal, 4-25
AI Start Trigger signal, 4-29
AI timing signals, 4-21
ai/ConvertClock, 4-25
ai/ConvertClockTimebase, 4-29
ai/HoldCompleteEvent, 4-29
ai/PauseTrigger, 4-31
ai/ReferenceTrigger, 4-30
ai/SampleClock, 4-23
ai/SampleClockTimebase, 4-25
ai/StartTrigger, 4-29
analog
comparison event, routing, 11-3
comparison event, signal, 11-3
edge triggering, 11-3