Index
I-2 | ni.com
trigger actions, 11-3
trigger types, 11-3
triggering, 11-2
analog edge triggering
with hysteresis, 11-4
analog input, 4-1
channels, 11-2
charge injection, C-1
circuitry, 4-1
connecting signals, 4-11
connecting through I/O connector, 4-1
crosstalk when sampling multiple
channels, C-1
data acquisitions, 4-9
methods, 4-9
differential, troubleshooting, C-1
getting started with applications in
software, 4-32
ghost voltages when sampling multiple
channels, C-1
ground-reference settings, 4-1
lowpass filter, 4-3
MUX, 4-1
range, 4-2
sampling channels with AI Sample
Clock and AI Convert Clock, C-2
signals, 4-21
AI Convert Clock, 4-25
AI Convert Clock Timebase, 4-29
AI Hold Complete Event, 4-29
AI Pause Trigger, 4-31
AI Reference Trigger, 4-30
AI Sample Clock, 4-23
AI Sample Clock Timebase, 4-25
AI Start Trigger, 4-29
timing diagrams, B-1
timing signals, 4-21
triggering, 4-10
troubleshooting, C-1
analog output, 5-1
circuitry, 5-1
connecting signals, 5-5
data generation methods, 5-3
fundamentals, 5-1
getting started with applications in
software, 5-10
glitches on the output signal, 5-3
offset, 5-2
reference selection, 5-2
signals, 5-6
AO Pause Trigger, 5-7
AO Sample Clock, 5-8
AO Sample Clock Timebase, 5-9
AO Start Trigger, 5-6
timing diagrams, B-20
timing signals, 5-6
trigger signals, 5-5
triggering, 5-5
troubleshooting, C-2
analog source, triggering, 11-2
analog to digital converter, 4-2
analog trigger, 11-2
accuracy, 11-6
actions, 11-3
improving accuracy, 11-6
analog window triggering, 11-5
ANSI C documentation, E-4
AO FIFO, 5-1
AO offset, 5-1
AO offset and AO reference selection
settings, 5-2
AO Pause Trigger signal, 5-7
AO reference selection, 5-1
AO Sample Clock, 5-1
AO Sample Clock signal, 5-8
AO Sample Clock Timebase signal, 5-9
AO Start Trigger signal, 5-6
ao/PauseTrigger, 5-7
ao/SampleClock, 5-8
ao/StartTrigger, 5-6
APFI terminals, 11-2
applications
counter input, 7-1
counter output, 7-19
edge counting, 7-2
arm start trigger, 7-29
avoiding scanning faster than necessary, 4-8
To Next Page
Loading...
