EasyManuals Logo

National Instruments BNC-2111 User Manual

National Instruments BNC-2111
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
BNC-2111 Installation Guide 14 ni.com
Electromagnetic Compatibility (BNC-2111 with Metal Enclosure Only)
Emissions................................................EN 55011 Class A at 10 m
FCC Part 15A above 1 GHz
Immunity ................................................EN 61326:1997 + A2:2001,
Table 1
EMC/EMI ...............................................CE, C-Tick, and FCC Part 15
(Class A) Compliant
Note For EMC compliance, operate this device with shielded cabling.
CE Compliance
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)..............73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .....................................89/336/EEC
Note Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/certification, search by model number or product line, and click the
appropriate link in the Certification column.
Where to Go for Support
The National Instruments Web site is your complete resource for technical
support. At
ni.com/support you have access to everything from
troubleshooting and application development self-help resources to email
and phone assistance from NI Application Engineers.
A Declaration of Conformity (DoC) is our claim of compliance with the
Council of the European Communities using the manufacturer’s
declaration of conformity. This system affords the user protection for
electronic compatibility (EMC) and product safety. You can obtain the DoC
for your product by visiting
ni.com/certification. If your product
supports calibration, you can obtain the calibration certificate for your
product at
ni.com/calibration.
National Instruments corporate headquarters is located at
11500 North Mopac Expressway, Austin, Texas, 78759-3504.
National Instruments also has offices located around the world to help
address your support needs. For telephone support in the United States,

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the National Instruments BNC-2111 and is the answer not in the manual?

National Instruments BNC-2111 Specifications

General IconGeneral
BrandNational Instruments
ModelBNC-2111
CategoryTerminal Block
LanguageEnglish