National Instruments CompactRIO sbRIO-9603 - Page 36

Figure 29. Secondary-Side Dimensions
98.4 mm(3.87 in.)
96.7 mm (3.81 in.)
0.0 mm (0.00 in.)
26.7 mm (1.05 in.)
7x Ø 3.2 mm
(0.13 in.)
65.4 mm (2.57 in.)
73.6 mm
(2.90 in.)
73.6 mm
(2.90 in.)
0.0 mm (0.00 in.)
3.2 mm (0.13 in.) 40.0 mm (1.58 in.)
43.8 mm (1.73 in.)
76.8 mm (3.03 in.)
153.7 mm (6.05 in.)
150.5 mm (5.92 in.)
71.7 m
(2.82 in.)
102.9 mm
(4.05 in.)
Note Holes and keepouts are sized for M3 standoff (4.5 mm Hex) or 4-40 standoff
(3/16-in. Hex).
36 | ni.com | CompactRIO Single-Board Controller with NI-DAQmx Hardware Installation Manual