Figure 30. Front Dimensions
0.0 mm (0.00 in.)
2.2 mm (0.09 in.)
13.6 mm (0.53 in.)
16.1 mm (0.64 in.)
0.0 mm (0.00 in.)
131.8 mm (5.19 in.)
124.6 mm (4.91 in.)
121.8 mm (4.80 in.)
114.6 mm (4.51 in.)
112.1 mm (4.41 in.)
96.1 mm (3.78 in.)
98.3 mm (3.87 in.)
4.0 mm (0.16 in.)
6.2 mm (0.24 in.)
9.4 mm (0.37 in.)
6.6 mm (0.65 in.)
78.8 mm (3.10 in.)
73.7 mm (2.90 in.)
64.7 mm (2.55 in.)
55.7 mm (2.19 in.)
48.7 mm (1.92 in.)
33.8 mm (1.33 in.)
39.7 mm (1.56 in.)
2.6 mm (0.10 in.)
Tip For two-dimensional drawings and three-dimensional models of the
sbRIO-962x/sbRIO-963x, visit ni.com/dimensions and search by model number.
sbRIO-962x/sbRIO-963x Maximum Component Heights
Note In addition to the maximum component heights, you must also observe
minimum keepaway distances for adjacent PCBs and surfaces.
CompactRIO Single-Board Controller with NI-DAQmx Hardware Installation Manual | © National Instruments | 37
To Next Page
Loading...
