Index
PCI-MXI-2 for Linux I-2 ni.com
front panel features, 4-3
MXIbus termination, 4-5
onboard DRAM, 4-8
DRAM configurations
(table), 4-8
SIMM size configuration
(figure), 4-8
parts locator diagram (figure), 4-2
VMEbus A16 base address, 4-3
VME-MXI-2 intermodule
signaling, 4-4
VXI-MXI-2 module
configuration EEPROM, 3-14
front panel features, 3-3
MXIbus termination, 3-13
onboard DRAM, 3-16
removing metal enclosure, 3-3
right-side cover (figure), 3-2
trigger input termination, 3-12
VXIbus CLK10 routing, 3-8
VXIbus Slot 0/non-Slot 0, 3-5
configuration EEPROM, B-1
controlling EEPROM operation, B-1
fixing invalid EEPROM
configuration, B-2
PCI-MXI-2 board, 2-4
VME-MXI-2 module, 4-6
VXI-MXI-2 module, 3-14
configuration settings, PCI-MXI-2
loading from file, 6-4
reverting to current settings, 6-4
saving to file, 6-4
updating current configuration, 6-3
controller
default controller (LA –1), 6-11
MXI system controller, 6-13
MXIbus system controller, 6-26
VMEbus system controller, 6-22
conventions used in the manual, x
D
Default Controller (LA –1), 6-11
default settings, 1-9
hardware settings (table), 1-13
PCI-MXI-2 board
Bus Configuration Editor
(table), 1-11
Device Configuration Editor
(table), 1-11
hardware settings (table), 1-9
Logical Address Configuration
Editor (table), 1-10
PCI-MXI-2 Universal board
hardware settings (table), 1-10
VME-MXI-2 module
Configuration Editor settings
(table), 1-13
hardware settings (table), 1-13
VXI-MXI-2 module, 1-13
Configuration Editor settings
(table), 1-13
Device Configuration Editor. See PCI-MXI-2
Device Configuration Editor
device type for PCI-MXI-2, setting, 6-6
diagnostic tools (NI resources), D-1
documentation
conventions used in manual, x
how to use manual set, ix
how to use this manual (figure), 1-2
NI resources, D-1
related documentation, xi
DRAM configuration
VME-MXI-2 module, 4-8
DRAM configurations (table), 4-8
SIMM size configuration
(figure), 4-8
VXI-MXI-2 module, 3-16
DRAM configurations (table), 3-16
SIMM size configuration
(figure), 3-17
To Next Page
Loading...
