National Instruments MXI Series User Manual

Index
© National Instruments Corporation I-5 PCI-MXI-2 for Linux
default settings
Bus Configuration Editor
(table), 1-11
Device Configuration Editor
(table), 1-11
hardware settings (table), 1-9
Logical Address Configuration
Editor (table), 1-10
hardware description, 1-4
installation, 2-4
quick start installation, 1-6
PCI-MXI-2 Bus Configuration Editor
default settings (table), 1-11
expansion ROM, 6-17
figure, 6-13
MXI bus
A24/A32 write posting, 6-16
MXI Bus Time Out (BTO), 6-14
MXI CLK10 signal, 6-14
MXI system controller, 6-13
MXI transfer limit, 6-15
MXI-2 auto retry, 6-15
limit on (note), 6-16
synchronous MXI, 6-15
user window and driver window, 6-16
window size, 6-16
PCI-MXI-2 Configuration Editor
default settings (table), 1-11
figure, 6-3
load configuration from file, 6-4
record configuration to file, 6-4
revert to current configuration, 6-4
saving changes, 6-3
update current configuration, 6-3
PCI-MXI-2 Device Configuration Editor
default controller (LA –1), 6-11
default settings (table), 1-11
figure, 6-10
number of handlers, 6-12
number of interrupters, 6-12
protocol register, 6-12
read protocol response, 6-12
servant area size, 6-11
system IRQ level, 6-11
PCI-MXI-2 Logical Address Configuration
Editor
address space, 6-6
controls, 6-6
default settings (table), 1-10
device settings group, 6-5
device type
classification, setting, 6-6
figure, 6-5
logical address parameter
range, default value, 6-5
resource manager delay, 6-10
VXI shared RAM options, 6-6
advanced shared RAM settings, 6-8
figure, 6-8
enable byte swapping, 6-9
memory select, 6-9
shared RAM pool, 6-7
lower half window and upper
half window, 6-7
VXI/VME shared RAM size, 6-7
window mapping, 6-9
PCI-MXI-2 Universal board
default settings
hardware settings (table), 1-10
problems and solutions, C-1
programming considerations. See
NI-VXI/NI-VISA software
programming examples (NI resources), D-1
protocol register contents, specifying, 6-12
Q
questions about NI-VXI/NI-VISA
software, C-1
quick start
configuration, 1-6
default settings, 1-9

National Instruments MXI Series Specifications

General

Brand	National Instruments
Model	MXI Series
Category	Recording Equipment
Language	English