National Instruments NI 9230 User Manual

This document explains how to connect to the NI 9230. In this
document, the NI 9230 with screw terminal and the NI 9230 with
BNC are referred to inclusively as the NI 9230.
Note Before you begin, complete the software and
hardware installation procedures in your chassis
documentation.
Note The guidelines in this document are specific to
the NI 9230. The other components in the system might
not meet the same safety ratings. Refer to the
documentation for each component in the system to
determine the safety and EMC ratings for the entire
system.
Safety Guidelines
Operate the NI 9230 only as described in this document.
Caution Do not operate the NI 9230 in a manner not
specified in this document. Product misuse can result in
a hazard. You can compromise the safety protection
built into the product if the product is damaged in any
2 | ni.com | NI 9230 Getting Started Guide

National Instruments NI 9230 Specifications

General

Brand	National Instruments
Model	NI 9230
Category	I/O Systems
Language	English