NI 9411 Operating Instructions and Specifications 12 ni.com
An example of a single-ended device is a single-ended encoder.
A single-ended encoder has phase A, phase B, and index signals.
Use the phase A signal to measure rotational speed. Use the
phase B signal to measure direction. Use the index signal to
measure the number of rotations.
Connect each of the signals of the encoder (phase A, phase B,
and index) to a DI pin. Figure 5 shows the connections for
one single-ended encoder.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
