NI 9411 Operating Instructions and Specifications 2 ni.com
This document describes how to use the National Instruments 9411
and includes specifications and pin assignments for the NI 9411. Visit
ni.com/info and enter rdsoftwareversion to determine which
software you need for the modules you are using. For information
about installing, configuring, and programming the system, refer to the
system documentation. Visit
ni.com/info and enter cseriesdoc
for information about C Series documentation.
Note The safety guidelines and specifications in this
document are specific to the NI 9411. The other
components in the system might not meet the same safety
ratings and specifications. Refer to the documentation for
each component in the system to determine the safety
ratings and specifications for the entire system. Visit
ni.com/info and enter cseriesdoc for information
about C Series documentation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
