NI Digital Waveform Generator/Analyzer Getting Started Guide | © National Instruments | 29
Table 4. NI 6555/6556 REMOTE SENSE Connector Pins
Pins Signal Name
Signal
Type
Signal Description
9, 11, 13, 15, 17,
19, 21, 23, 25,
27, 29, 31, 43,
45, 47, 49, 51,
53, 55, 57, 59,
61, 63, 65
DIO <0..23>
SENSE
Analog Remote sense pins for PPMU
channels 0 through 23.
26, 64 PFI <1..2>
SENSE
Analog Remote sense pins for PFI <1..2>.
33, 67 PFI <4..5>
SENSE
Analog Remote sense pin for PFI <4..5>
3, 5, 7, 30, 39, 41 NC No connect Do not connect to these terminals.
60 CAL GND Analog
ground
Ground reference for external
calibrator.
2, 4, 6, 8, 10, 12,
14, 16, 18, 20,
22, 24, 28, 32,
34, 36, 38, 40,
42, 44, 46, 48,
50, 52, 54, 56,
58, 62, 66, 68
GND Ground Ground reference for signals.
1 CAL DMM Analog Resource used during external
calibration.
35 EXTERNAL
SENSE
Analog Resource used for external SMU or
DC sense functions.
37 EXTERNAL
FORCE
Analog Resource used for external SMU or
DC force functions.
To Next Page
Loading...
