8 | ni.com | NI Digital Waveform Generator/Analyzer Getting Started Guide
Note NI recommends that you install slot blockers between modules to maximize
air flow. NI recommends using the PXI Chassis Slot Blocker Kit, part number
778678-01, available for purchase at
ni.com.
11. Plug in and power on the chassis.
NI PXI modules are sensitive instruments that should be handled carefully. Do not expose the
module to temperatures or humidity beyond the rated maximums. Keep the module free of dust
by cleaning with compressed air only. Do not clean the module with any solvents or liquids. For
more information about module cooling, refer to the guidelines in the Maintain Forced-Air
Cooling Note to Users included with your NI digital waveform generator/analyzer.
Installing a PXI Express Module
Follow the installation instructions in the Installing a PXI Module section to install a
PXI Express module in a PXI Express-compatible slot of the chassis. Refer to the chassis
documentation for more information about which slots are designated for PXI Express modules.
Figure 2 shows the correct installation of a PXI Express module into a compatible chassis slot.
Figure 2. PXI Express Module Installation
1 PXI Express Chassis
2 Ejector Handle in Down Position
3 NI PXI Express Module
4 Captive Screw
To Next Page
Loading...
Need help?
General
