National Instruments NI sbRIO-9627

Operating System
Note For minimum software support information, visit ni.com/info and enter the
Info Code swsupport.
Supported operating system NI Linux Real-Time (32-bit)
Minimum software requirements
Application software
LabVIEW LabVIEW 2015,
LabVIEW 2015 Real-Time Module,
LabVIEW 2015 FPGA Module
C/C++ Development Tools for
NI Linux Real-Time
3
Eclipse Edition 2014
Driver software NI CompactRIO Device Drivers August 2015
Reconfigurable FPGA
Type Xilinx Zynq-7000,
XC7Z020 All Programmable SoC
Number of logic cells 85,000
Number of flip-flops 106,400
Number of 6-input LUTs 53,200
Number of DSP slices
(18 x 25 multipliers)
220
Available block RAM 560 KB
Number of DMA channels 16
Number of logical interrupts 32
Network/Ethernet Port
Number of interfaces
Front Panel Ethernet 1 (Eth0)
RMC Ethernet 1 (Eth1)
3
C/C++ Development Tools for NI Linux Real-Time is an optional interface for C/C++
programming of the sbRIO-9627 processor. Visit ni.com/info and enter Info Code RIOCdev for
more information about the C/C++ Development Tools for NI Linux Real-Time.
2 | ni.com | NI sbRIO-9627 Specifications