National Instruments PXIe-5413 Getting Started Guide

Figure 1. PXIe-5413 Kit Contents
1
3
2
1. PXIe-5413
2. PXIe-5413 Getting Started Guide (this document)
3. Maintain Forced-Air Cooling Note to Users
Caution To prevent electrostatic discharge (ESD) from damaging the module,
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the module from the package and inspect it for loose components or other signs
of damage.
Caution Never touch the exposed pins of connectors.
Note Do not install a module if it appears damaged in any way.
3. Unpack any other items and documentation from the kit.
Store the module in the antistatic package when the module is not in use.
Other Equipment
There are several required items not included in your PXIe-5413 kit that you need to operate
the PXIe-5413. Your application may require additional items not included in your kit to
install or operate your PXIe-5413.
Required Items
• A PXI chassis and chassis documentation
• A PXI controller or PC with a device for PXI remote control system that meets the
system requirements specified in this guide and chassis documentation
PXIe-5413 Getting Started Guide | © National Instruments | 3

National Instruments PXIe-5413 Specifications

General

Brand	National Instruments
Model	PXIe-5413
Category	Inverter
Language	English