Index
I-2 | ni.com
memory
installation, B-21
support, B-21
system memory allocation and
availability, B-21
upgrading, 1-6, B-20
installing DDR modules, B-22
removing DDR modules, B-23
modular instruments, 1-6
N
National Instruments software, 1-6
NI-DAQmx, 1-6
NI-VISA, 1-7
Non-RAID, resetting to, C-4
O
optional equipment, 1-6
memory upgrades, 1-6
OS reinstallation and recovery, 2-36
overview, 1-2
P
power cables (table), 1-2
power supply, connecting to, 2-3
power up, testing, 2-3
pxisys.ini file, 4-2
R
rack mount kit dimensions (figure), A-5
rack mounting, 2-36
RAID HDD, resetting, C-4
RAID volume, deleting, C-4
RAID0 volume, creating, C-2
RAID1 volume, creating, C-2
RAM
DDR DIMMs from National Instruments
(note), 1-6
upgrading, 4-3
recovery volume
creating, C-3
options, C-4
replacing hard disk drives, B-24
RMC-8356
boot options, 4-2
chassis configuration, 4-2
chassis cooling considerations, 2-2
common configuration questions, 4-1
configuration, hardware, B-1
description, 1-4
front panel LEDs, 4-1
hard drive part numbers, B-26
hardware configuration, B-1
installation, 2-1, 2-2
key features, 1-2
memory upgrades, 1-6
overview, 1-2
power source, connecting to, 2-3
rack mounting, 2-36
safety and caution notices, 2-1
safety ground, connecting, 2-3
software, 1-6
troubleshooting, 5-1
upgrade information, 4-3
upgrade/optional equipment, 1-6
upgrading and replacing hard disk
drives, B-24
upgrading memory, B-20
upgrading RAM, 4-3
using with PXI chassis, 4-2
S
safety and caution notices, 2-1
safety ground, connecting, 2-3
safety, specifications, A-3
SATA RAID utility, C-1
software
See also drivers
LabVIEW, 1-6
LabWindows/CVI, 1-6
Measurement Studio, 1-6
National Instruments software, 1-6
NI-DAQmx, 1-6
NI-VISA, 1-7
specifications
CE compliance, A-4
electrical, AC input, A-1
electromagnetic compatibility, A-4
To Next Page
Loading...
