National Instruments USRP-2930 User Manual

Figure 3. Connecting the Express Card to a Laptop Computer
4
2
1
3
1. Cable included with ExpressCard Interface Kit
2.
NI ExpressCard-8360B
3. ExpressCard Slot
4. Laptop Computer
Using the Optional NI PCIe - MXI Express Interface Kit
for USRP RIO to Connect to a Desktop Computer
1.
Power down your NI 294x/295x device.
2. Power down your desktop computer.
3. Follow the installation instructions in the Hardware Installation section of the Set Up
Your MXI
™
Express ×4 System document included in the kit to install the NI PCIe-8371.
4. Connect the NI 8371 to the to the NI 294x/295x using the included cable.
5. Power on the NI USRP device.
6. Power on the desktop computer.
Related Information
Refer to the Set Up Your MXI
™
Express ×4 System printed document
Using the Optional NI PXIe - MXI Express Interface Kit
for USRP RIO to Connect to a PXI Express Chassis
1.
Power down your NI 294x/295x device.
2. Power down your PXI Express chassis.
NI USRP-29xx Getting Started Guide
| © National Instruments | 13

National Instruments USRP-2930 Specifications

General

Brand	National Instruments
Model	USRP-2930
Category	Test Equipment
Language	English