7. Mixer Control
The X1 MK3 can be switched to mixer mode in order to control Traktor Pro's mixer using the
effects section at the top of the device.
The mixer includes the following controls:
1. Mode Select Button: Press this button to enter mixer mode. If four FX units are congured in
your layout you might have to press this button repeatedly until the central Mode display at the
top shows MIXER.
2. Displays: Each deck on the left and right has a dedicated display that shows the value of
the control that was last changed using one of the knobs below. Additionally, the headphone
icon turns on when Cue is active. The central display includes a volume meter as well as a
representation of which decks are active. Active decks are represented by their corresponding
letter (A, B, C, or D) in black on a white background, while inactive decks are represented by a
white letter on black background.
3. Hi: The rst button and knob controls the high band of Traktor Pro's equalizer. Turning the knob
clockwise boosts high frequencies of that deck, while turning it counterclockwise will attenuate
high frequencies. Pressing the button activates a high cut lter. The button lights up in bright
blue and stays lit while the high-cut is active. Pressing the button again deactivates the lter.
4. Mid: The second button and knob controls the middle band of Traktor Pro's equalizer. Turning
the knob clockwise boosts middle frequencies of that deck, while turning it counter clockwise
attenuates middle frequenies. Pressing the button activates a mid-cut lter. The button lights
up in bright blue and stays lit while the mid-cut is active. Pressing it again deactivates the lter.
5. Lo: The third button and knob controls the low band of Traktor Pro's equalizer. Turning the knob
clockwise boosts low frequencies of that deck, while turning it counter clockwise attenuates
low frequencies. Pressing the button activates a low-cut lter. The button lights up in bright
blue and stays lit while the low-cut is active. Pressing it again deactivates the lter.
6. Cue and Volume: The last button activates the Cue functionality, allowing you to listen to a
track through your headphones. The last knob controls the volume of the track.
MIXE R CONTR OL 12
To Next Page
Loading...
