1. Deck Displays: The deck displays provide essential information about their respective track
deck. At the top they display the current track name, below the remaining time of a given track,
and at the bottom a progress bar indicating the current track position. On the right side of
the display, the number at the top represents the loop length, and the letter at the bottom the
current deck. When a loop is active or a track is playing, the background of the loop length and
track indicator turns white. If a deck is congured as live input, the display will just show Live
Input.
2. Browse Encoder: Browse and load tracks using this encoder. Turning it navigates the track list.
Pressing it loads the selected track into the corresponding deck. Holding SHIFT while turning
navigates the le tree and pressing while holding SHIFT opens folders in the tree.
3. Loop Indicator LED: This icon lights up when a loop is active.
4. Loop Encoder: Turning this encoder changes the loop length. Pressing it activates the loop.
Pressing it again deactivates the loop. Holding SHIFT while turning the encoder will jump
through the track using the current loop length as increment. Doing this while a loop is active
also moves the loop.
5. SHIFT Button: The SHIFT button unlocks many secondary functions across the controller.
These are explained in the respective control description.
Hotcues
Hotcue buttons are used to set and jump to Hotcues. Pressing an unassigned Hotcue button sets
this Hotcue to the current track position. Pressing it again jumps to that track position. They are
also highly customizable using the Preferences of the Traktor Pro software. For more information
on the available options, refer to Customizing the Controller.
Traktor X1 MK3's Hotcue buttons.
MIXE R CONTR OL 14
To Next Page
Loading...
