Native Instruments TRAKTOR X1 - Page 6

3. Upon startup, the controller will ask you to congure a layout for the FX units and decks.
• Use the arrow buttons at the top of the controller to cycle between different FX unit
assignments.
• Use any of the four encoders next to the displays in the center to cycle between deck
assignments.
4. Press any of the four encoders next to the displays in the center to conrm your conguration.
→ Your controller is congured and you are ready to start mixing and using effects.
FX unit and deck assignments can be changed at any time on the Decks Layout page
of the Traktor Pro Preferences.
INST AL LA TION & SETUP 4